Sunday, November 19, 2006

Welcome to Neo Liners International Blog

Our Top Selected Article of the Week

Welcome to NeoLinersInternational.blogspot.com - your friendly blog of comprehensive omniscient content resource. You can find your interesting topic from our several articles and contents.

Each week we will choose one of the leading top 50 interest articles and hottest news of the week regarding technology concern, and present it on our blog as the cover story of the week. Below you will find extensive information on the said proudly selected articles to broaden your knowledge on your way to success.

This Week's the Most Interesting Selected Topic is under "Computer" category :

Tips On Buying A Used Laptop.

Author: Nick Nano.
Article: Copyright © 2006 Nick Nano.

Ever buy something second hand, get it home, and realize that there was something wrong with it, and that the flaw was probably going to haunt you until the day that you either sell it, give it away, or throw it away? Well, hopefully this article will keep that from happening if your in the market to buy a used laptop .

With the advent of new technologies, much more powerful laptops have become available, and at more reasonable prices. Computer manufacturers have made so many advances, that it has completely revamped the market for used laptops . Previously, if you were in the market to purchase a used laptop , you would have no choice but to settle for a machine whose computing power could not handle the software overhead of the newest programs. So, to be able to handle the "high-overhead" of these programs, the need to upgrade became imperative; creating a new market, which consists of a whole new generation of used laptops, which are much more powerful than ever before.

Students, who are required to stay on budget, recently have found it more cost-effective to purchase a used laptop, rather than a new one. A student, or consumer, can now find a used machine that will accomplish the same required amount of computing as a brand-new machine, and in many instances for only a little more than half the price of a new machine.

However, as with any piece of used electronic equipment, there are drawbacks; as some laptops withstand "normal wear and tear" better than others. The models that have proven themselves to become known as bulletproof, usually command a higher price; and conversely, the more proprietary a machine is, the more apt it is to be found in the lower percentile of the respective price range.

Irregardless of what strata of used machine you are in the market for, there are certain things that a perspective used laptop owner should be aware of.

Most electronic, and electrical, troubleshooters learn in the course of plying their craft, that the features that are most likely to go first, on any piece of equipment, are the ones that receive the most ergonomic interfacing. To put that in more laymen terms, whatever gets handled, pushed, pulled, turned, and slid; is usually the first suspect that you look at, after a failure.

Having said that, there are some important points that one should keep in mind when looking at a prospective used laptop; the first of which, is whether or not you are purchasing the machine on a as-is basis, or not. If you are purchasing the machine from a reputable store, that offers a return policy, or a limited warranty, then at least you have the grace of taking it home, and giving it the once over. If however, you are purchasing the machine from let's say an individual, or a store who maintains an "as is" policy, then it's buyer beware.

The first point of review should be the condition of the display. With the machine off, and the screen dark, look at the screen from off to the side; inspect it for any scratches or aberrations, then with the machine on, and the screen lit up, give the display a good looking over. What you do not want, is to get it home and realize that there is a blem on the screen; because if you bought it on a "as is" basis, you will have to look at that defect for a long, long time. So check, and double check the screen.

The next thing you want to look at are the connectors; where the mouse, ethernet, USB, and power connectors go into the machine. Laptops were designed specifically to be mobile, unlike their desktop counterparts. So that means they are going to be carried, stuffed, un-stuffed, and accidentally dropped, kicked, and banged.

If the machine was used, for navigation, with say, possibly any of the popular GPS software, then there is a good chance that it was required to ride shotgun in the passenger seat of a moving vehicle, and subject to abrupt stops, which could possibly have caused it to be airborne. Now I know this is a worst-case scenario, but I want you to think about the laws of probability, specifically the one having to do with the three circles, and the hundred marbles. Eventually, those three marbles will role outside the third circle, and then Murphy's Law will prevail.

Assuming that the machine was at some point mobile, and some, if not all the required devices were plugged into it, and the user had to inadvertently slam on the brakes; we can also assume that the machine went flying. Experience has shown, that there is conclusive evidence that indicates once a machine has become airborne, they don't land very well. They usually land on their side, and possibly the side that has all the aforementioned connectors coming out of it; and those connectors were not meant to be used as landing gear. So, after-the-fact what will be left, is a female connector that looks just fine from the outside, but the devil is in the details. And there is really no way of telling unless you have a flashlight, and a magnifying glass, and you know exactly what you're looking for.

Once a USB, or ethernet connector has been damaged, there is really no cost effective way to repair it, except to purchase a PCMCIA card, that replicates the device that has been damaged; and that will unnecessarily tie up a PCMCIA slot.

So, what I recommend when you're out looking to buy a used laptop , is that you bring with you, a set of connectors. Bring a mouse, to plug into the connector where the mouse goes; a USB connector to test the "feel" of the connector where the USB connectors go in; a RJ-11 jack, for checking the telephone line receptacle, and basically any other connectors, that would relate to any other devices that you plan to be plugging in to that particular machine. What you will be looking for is two things. First, do the connectors stay in after you push them in? Do you hear the characteristic "click" on the ones that are supposed to click? Gently tug on them to see if they pop out too easy; or do they stay in like they are supposed to? You want them to stay in.And second, does the connector go in smoothly and snugly? If not, look for another unit.

If the power supply for the machine is available, check the feel of the power connector going into the power receptacle on the back of the unit. If it feels like it wants to fall out right after you plug it in, than that will be problematic when you have the machine in a mobile environment. Make sense? You want to make sure that the connectors, once they are inserted into their respective receptacles, will stay there. Lest they will be falling out when you're trying to get things done, and causing unneeded aggravation.

On the subject of what you will be in possession of, data-wise, on the machine, after you own a used laptop ; plan on reinstalling the operating system. But before you do that, you should invest in some type of software which "wipes" the drive or files, such as HyperWipe instead just deleting them. The difference between wiping, and deleting, is that when you wipe a drive, or file, the procedure of wiping actually writes, and rewrites, over the specified area on the drive, to make any previous data un-recoverable.

As part of the deal, if you can, you should also try and get two disks. The first, would be for the operating system that is already installed on the machine, so you can reinstall it, thereby giving yourself the benefit of being able to start from a clean slate; and the other disk should be the OEM (Original Equipment Manufacturer) disk, for whatever brand, make, and model machine it is, which contains the drivers that are peculiar to any proprietary peripherals that come with the machine, such as sound cards, software modems, display adapters, drives, and so forth; because when a manufacturer says "we don't support that anymore", they mean it.

Following this simple plan of performing a limited number of semantics prior to purchase, hopefully, will allow you to sidestep any aggravation from recurring problems after purchase of a used laptop .

This Article Written by: Nick Nano - © 2006 Nick Nano

About the author:

The author has been in the electronics and electrical industry since 1972. He enjoys technical reading, building projects, and research and development. He has two unrelated websites ; visit Nick Nano and read more articles at the author's websites .

Editor of Neo Liners International : Boonchai Thaveetermsakul

About the Editor : Coordinator and Web Alliance of i-Prosper.org and i-Prosper.biz

No comments: